Outdrives.Net	Mercruiser Sterndrive Information, Outdrive Information
	Mercruiser Parts Mercruiser Help Mercruiser Manuals Mercruiser Tools Mercruiser Outdrives Contact

Power Trim Pumps

Mercruiser has updated trim pump designs over the years.
It is important to match your pump with your cylinder style.

Older pumps (Prestolite) that have the square reservoirs and cylindrical motors are no longer sold.
These older units were High Pressure-Low Volume pumps.
Mercruiser now has replacement High Pressure-Low Volume pumps (see below).
This "adaptor" pump looks just like the new style Oildyne pump.
They used the smaller diameter hydraulic trim cylinders.
(pre-Alpha and "R"-drives)

Newer style pumps (Oildyne) are Low Pressure-High Volume pumps.
These newer units will have a plastic motor housing and a white plastic reservoir.
They should be matched to the newer larger diameter hydraulic trim cylinders.
(Alpha One, Alpha Generation II and Bravo Drives)

93247A7 High Pressure-Low Volume Pump Assembly $730.00 Used on older pre-Alpha and "R" style applications. Matched to the smaller older style trim cylinders. Eliminates the need for a mechanical reverse lock valve.

14336A17 (New # 865380A25 )Low Pressure-Hi Volume Pump Assembly $1050.00 Used on Alpha One, Alpha Gen II and Bravo Drive applications. Matched to the larger new style trim cylinders.

Partial Low Pressure Pump Assemblies

14336A20 ( New # 865380A13) Low Pressure-Hi Volume Partial Pump Assembly (new) $799.42 Used on Alpha One, Alpha Gen II and Bravo Drive applications. Includes Motor, Pump and reservoir only. Matched to the larger new style trim cylinders.

14336R20 Low Pressure-Hi Volume Pump Assembly (remanufactured) $599.50 Used on Alpha One, Alpha Gen II and Bravo Drive applications. Includes Motor, Pump and reservoir only. Matched to the larger new style trim cylinders.

Important! The plastic reservoirs have changed.

Is your white plastic reservoir cracked near the mounting screw hole?
You are not alone.
Early plastic reservoirs uses one mounting screw and the reservoir would
develop spider cracks around the screw hole.
The old defective reservoir was part number 18525A1 which is no longer sold.
If you have a cracked single-screw reservoir tank, you will need to purchase
a Top-Mount style reservoir-pump kit 883169A1.
This is mentioned in Mercruiser Parts Bulletin 01-04.

883169A1 Top Mount Reservoir Update Kit $436.00 Includes pump and top-mount style reservoir tank, screws and o-ring.

883166A2 Top Mount Reservoir $77.44 Fits new style 4-screw type pump housings only. This tank will NOT fit the old style single-screw pumps. Includes oring and screws.

What type of oil? These units all use standard 10-40WT Motor Oil.

Mercruiser Sterndrive Parts. Pre-Alpha, R, MR and MC1 Parts Alpha One Parts Seal Kits Alpha One Gimbal (Transom) Parts and Kits Alpha Gen II Parts Alpha Gen II Gimbal (Transom) Parts and Kits Bravo One Parts Bravo Two Parts Bravo Three Parts Bravo Gimbal (Transom) Parts and Kits TR and TRS Parts Transom Seal Kits Gimbal Bearings Shift Cable Kits Gear Kits Shift Interuptor Switch Kits Anodes and Zinc Kits Water Pump Kits Power Trim Pump Kits and Trim System Parts Decal Sets Sterndrive Special Tools Mercruiser shop Manuals Propellers Remote Controls Gauges Trim Sender Switches Trim Cylinder Assemblies

Mercruiser Engine Parts Filters and Filter Kits Tuneup Kits Carburetor Rebuild Kits Carburetors Raw Water Pump Kits Circulation Water Pumps Spark Plugs Spark Plug Wire Kits Gasket Sets Exhaust Manifolds Exhaust Elbows Exhaust Riser Kits Exhaust Water Shutter Kits Ignition Modules and Ignition Coils Cooling System Parts Starter Motors Solenoids Alternators and Charging Systems Belts and Belt-Pulley Kits Drive Couplers Fuel Pumps (Mechanical and Electric) Wire Harnesses Gauges and Instruments Partial Engine Assemblies Grease, Lubricants and Adhesives

©2004 Outdrives.Net •Email • About Us • Home • Return Policy

• Mercruiser Help • Shop Manuals • Search • Contact

Note: We are NOT Mercury Marine or Mercruiser.